Curious about the robots deployed?
Process Overview
This deployment was implemented at Yuhan-Kimberly’s Chungju Plant, delivering an integrated solution that combines a Yaskawa industrial robot with a strapping-cut workbench to automate depalletizing + strap cutting.
The customer pursued a depalletizing system to reduce labor costs and operator fatigue, and showed strong interest in automating strap cutting and strap discharge to further maximize cost savings and operational efficiency.
The solution handles mixed carton sizes by aligning (squaring) cartons, cutting and removing straps, and then feeding cartons into the case packer. This improves throughput and consistency in both carton infeed and strap removal, while reducing physical strain on operators and enhancing workplace safety.
Project Background and Objectives
At Yuhan-Kimberly’s Chungju Plant, cartons arriving on pallets were previously broken down manually and then loaded one-by-one into the case packer. The work was highly repetitive, and manual strap removal using knives created a persistent risk of safety incidents.
The objective of this project was to minimize reliance on manual labor by automating the entire process—from depalletizing through case packer infeed—and to achieve lights-out (unmanned) operation for strap cutting. This enables improved operator safety, reduced fatigue and staffing burden on the floor, and more stable, repeatable plant operations.
Components
| Robot | Yaskawa GP50 Industrial Robot: A high-speed, high-precision 6-axis articulated robot optimized for palletizing/depalletizing operations. It can automatically pick, place, and transfer a wide range of products, making it well-suited for industrial automation. |
|---|---|
| Peripherals | Carton Aligner + Strap-Cutting Station: A workbench system that squares/aligns cartons of various sizes, then cuts and evacuates strapping. Safety Light Curtain + Perimeter Fence: Visually separates the operator zone from the robot cell. If an operator enters the depalletizing area, the system immediately stops motion to ensure safety. |
Workflow
| STEP 1. | An operator loads a pallet of stacked cartons into the designated loading position |
|---|---|
| STEP 2. | The operator selects the carton “recipe” on the HMI (OP panel) and starts the cycle |
| STEP 3. | The robot depalletizes bundled cartons per the selected recipe and transfers them to the alignment/strap-cutting station |
| STEP 4. | The station squares the bundle using servo drives and pneumatic cylinders |
| STEP 5. | The system cuts the straps while the cartons are securely clamped in position |
| STEP 6. | A hook mechanism captures and discharges the cut straps |
| STEP 7. | The station re-squares the bundle to prevent misalignment during cutting |
| STEP 8. | The robot feeds individual cartons to the case packer infeed one by one. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Recommended Use Cases
유한킴벌리의 선택! 디팔레타이징+컷팅 완전 자동화 📦
해당 도입사례는 유한킴벌리 충주공장 에 도입된 사례로, 야스카와 산업용 로봇과 노끈 컷팅 작업대를 결합하여 디팔레타이징 + 노끈 컷팅 자동화를 구현한 솔루션입니다. 고객사는 인건비 절감, 업무 피로도 감소를 위해 디팔레타이징 시스템을 도입하고, 비용 절감과 효율성을 극대화하기 위해 노끈 컷팅 및 배출 자동화에 높은 관심을 보였습니다. 본 솔루션은 다양한 크기의 상자에 대하여 정렬하고 컷팅 후 케이스패커에 공급하여, 박스 공급 및 노끈 컷팅 과정의 효율성을 향상시키며, 작업자의 물리적 부담을 줄이고 안정성을 확보했습니다.
Yuhan-Kimberly's Choice! Fully Automated Depalletizing and String Cutting 📦
Process Overview This implementation case, implemented at Yuhan-Kimberly's Chungju factory , combines a Yaskawa industrial robot with a string cutting workstation to achieve automated depalletizing and string cutting. The client introduced the depalletizing system to reduce labor costs and work fatigue, and expressed strong interest in automating rope cutting and discharge to maximize cost savings and efficiency. This solution sorts and cuts boxes of various sizes before feeding them to the case packer, improving the efficiency of the box feeding and rope cutting processes, while also reducing the physical burden on workers and ensuring safety. Project Background and Objectives At Yuhan-Kimberly's Chungju factory , the process of dismantling palletized boxes and loading them into case packers individually was entirely manual. This process was highly repetitive and presented a constant risk of safety accidents due to the use of knives during the removal of the twine. The goal of this project was to automate the entire process, from depalletizing to loading into the case packer, minimizing human dependence. Furthermore, by unmanning the twine cutting process, we aimed to ensure worker safety, reduce fatigue and on-site personnel burden, and ensure stable plant operations.
Machining Support for a WIA Turning Center Using Two DENSO Robots ⚙️🏭
Process Overview This automation solution uses two DENSO robots—VM60B1 (6-axis vertical articulated robot) and HS055 (SCARA robot)—to automate raw material loading, turning-center machining of plastic parts, and a downstream press-fit (crimping) operation. By integrating material loading, machining support, and press-fit handling into a single automated workflow, the system minimizes control points while improving overall productivity.
Process Overview
This deployment was implemented at Yuhan-Kimberly’s Chungju Plant, delivering an integrated solution that combines a Yaskawa industrial robot with a strapping-cut workbench to automate depalletizing + strap cutting.
The customer pursued a depalletizing system to reduce labor costs and operator fatigue, and showed strong interest in automating strap cutting and strap discharge to further maximize cost savings and operational efficiency.
The solution handles mixed carton sizes by aligning (squaring) cartons, cutting and removing straps, and then feeding cartons into the case packer. This improves throughput and consistency in both carton infeed and strap removal, while reducing physical strain on operators and enhancing workplace safety.
Project Background and Objectives
At Yuhan-Kimberly’s Chungju Plant, cartons arriving on pallets were previously broken down manually and then loaded one-by-one into the case packer. The work was highly repetitive, and manual strap removal using knives created a persistent risk of safety incidents.
The objective of this project was to minimize reliance on manual labor by automating the entire process—from depalletizing through case packer infeed—and to achieve lights-out (unmanned) operation for strap cutting. This enables improved operator safety, reduced fatigue and staffing burden on the floor, and more stable, repeatable plant operations.
Components
| Robot | Yaskawa GP50 Industrial Robot: A high-speed, high-precision 6-axis articulated robot optimized for palletizing/depalletizing operations. It can automatically pick, place, and transfer a wide range of products, making it well-suited for industrial automation. |
|---|---|
| Peripherals | Carton Aligner + Strap-Cutting Station: A workbench system that squares/aligns cartons of various sizes, then cuts and evacuates strapping. Safety Light Curtain + Perimeter Fence: Visually separates the operator zone from the robot cell. If an operator enters the depalletizing area, the system immediately stops motion to ensure safety. |
Workflow
| STEP 1. | An operator loads a pallet of stacked cartons into the designated loading position |
|---|---|
| STEP 2. | The operator selects the carton “recipe” on the HMI (OP panel) and starts the cycle |
| STEP 3. | The robot depalletizes bundled cartons per the selected recipe and transfers them to the alignment/strap-cutting station |
| STEP 4. | The station squares the bundle using servo drives and pneumatic cylinders |
| STEP 5. | The system cuts the straps while the cartons are securely clamped in position |
| STEP 6. | A hook mechanism captures and discharges the cut straps |
| STEP 7. | The station re-squares the bundle to prevent misalignment during cutting |
| STEP 8. | The robot feeds individual cartons to the case packer infeed one by one. |
※ The content provided by Bigwave Robotics is protected under U.S. and Canadian copyright and intellectual property laws. Unauthorized reproduction, distribution, or use of this content is strictly prohibited.
Curious about the robots deployed?
Related Use Cases
유한킴벌리의 선택! 디팔레타이징+컷팅 완전 자동화 📦